Having learned the lessons on mounting the driver's side seat belts and having bolts that work, the belt went in on the passenger side without a problem. I then mounted the sliders to the bottom of the passenger seat, setting the bolts finger-tight and slid it into place. I gently slid it out again and tightened up the bolts. I slid it back in, and it works like hot butter!
I then cleaned the center console bottom pan and the upper pad. I screwed in the pan and popped the pad into place. It's held in quite nicely by the two inside seat belt units.
It now looks almost like a car again! I gave my wife a ride around the house a few times.
No comments:
Post a Comment