Since it's dark by the time I get home from work, I decided to do some work on the targa top in the workshop with the lights on. I prepped for spraying contact adhesive by running wide painter's tape around the outside edge.
I decided to use foil-lined insulated padding which will cut down on road noise and heat.
I cut it into shape.
The foil side goes up, so it gets glued into the bottom of the targa top.
I then cut the liner oversize and spray glued it into place over the padding.
Next I will cut the liner to exact size, then mount the latches and rubber seals.
0 comments:
Post a Comment